DIY ombre shirt

DIY ombre shirt

ingredients :

Cotton T-Shirt
Fabric dye
Salt
Hot water
Sponge brush
Gloves
5 plastic cups
Cardboard

IMG_1749.jpg

Making the dye mixture:

 
One of the most important steps to making the ombré effect is making the dye mixture. The goal is to have five cups of dye that start with the highest concentration of dye in the first cup and the lowest concentration in the last cup. Do this by keeping the same amount of water in each cup and add less and less dye as you go along. Dye package instructions may vary, but most will require hot water and salt. Salt is very important because it acts as a binder between the cotton fibers and dye. I put around ½ tablespoon of salt in each cup but you really can’t put too much. After the salt dissolved in the hot water, I added around 1½ tablespoons of dye in the first cup and gradually added less dye in each cup. There is room for error during this process. As long as the color gradually shifts from light to dark, it should work great.

Dying the shirt:
I started with the darkest color on the bottom so that the ombré went from light at the top to dark at the bottom.

Start by wetting the fabric. The easiest way is to pour clean water onto the shirt after the cardboard is in it, making sure to wet the entire shirt before you start painting.

Start with the darkest color. You will want to paint from side to side going up the shirt. As you move from one cup to the next, the dye will naturally blend. If stripes become apparent, you can blend the colors with the sponge.

IMG_1761.jpg

After you have painted around ¼ of the shirt with the darkest color, move to the next cup. ­­

IMG_1765.jpg

Note: I wet the area I was working on as I went but I think it would be easiest to wet the entire shirt before you start painting.

IMG_1775.jpg

When you are about halfway up the shirt, move to the third cup. Continue painting and use the forth and fifth cups to paint the remaining top half of the shirt.

IMG_1780.jpg

Once the front is completely painted, flip the shirt over to paint the back. It might look something like this but don’t worry — the marks will blend in with more dye!

Wet the entire back of the shirt and repeat the steps as done on the front. Once the back is painted, lay the shirt out to dry.

When the shirt is dry, the dye is set. Rinse the shirt to remove the excess dye. When the water runs clean your shirt is ready! Dry the shirt and enjoy!

source : http://www.marketcolors.org/blog-archive/blog/ombre-shirt

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s